Options Available

Prelaminated warm white BSL plywood

MDF

Prelaminated warm white BSL plywood

HDF HMR


grey high gloss office reception desk

  • texture icon
    Available in a wide range of colours, finishes and textures
  • roll icon
    Foils are sourced from across the globe.
  • factory
    Produced on the world's best Barberan (Spain) flat lamination line with Valco Melton (USA) glue spreader.
  • quality badge
    India’s only company with Wandres (Germany) cleaning system ensures zero surface deformation.
  • machine
    Produced in a 100% dust-free and temperature controlled environment.
  • glue
    Highest quality polyurethane (PUR) glue for life-long product durability.

To ensure that you get the best long-term performance and enjoyment from your Clean Touch surface, please follow the cleaning recommendations provided in this document.

We strongly recommend cleaning the Clean Touch surface immediately after soiling by wiping with a damp cloth, or with the recommended cleaning agents and accessories.

For easy and quick cleaning please use household grease cleaner / spray-bottles [with water, <5% anionic surfactants and soap] in combination with a soft micro-fibre cloth or a terry-towelling cloth.

STAIN REMOVAL:
To remove stains caused by common liquids and substances such as coffee, tea, mustard, ketchup, oil/fat, balsamic vinegar, lemonade, butter, wine, pencil, shoe polish, and dirty water, we recommend the use of clean water, a damp cloth, common dishwashing liquid and a melamine dirt eraser sponge. These are commonly available in most major grocery or hardware stores. Please check the label of the sponge to confirm that it is a melamine sponge and not a common household sponge.

There are cleaning agents which are recommended as being suitable and cleaning agents which are not recommended for Clean Touch surfaces.

Recommended:

  • Common dishwashing liquids
  • Clean water
  • Melamine Dirt eraser sponge
  • Soft micro-fibre cloth or Soft terry towelling cloth
  • Household grease cleaning agents/sprays with water, >5% anionic surfactants and soap (easy & fast cleaning)

Not Recommended: (Please avoid using any of these).

  • Abrasive cleaning materials and accessories such as steel wool, stainless steel scrubbing pads, and sponges with an abrasive surface such as Scotch Brite.
  • Abrasive creamy cleaners and cleaning powders.
  • Pointed or sharp objects such as blades, knives and scrapers.
  • Strong concentrated acids/alkali.

Using any of these above items are not recommended as they will cause irreversible damage to your Clean Touch surface and its properties!

TOUGH HARD TO REMOVE STAINS:
In cases where the stain has already dried, please place a wet cloth soaked with some dishwashing liquid on the affected area (allow about 1-2 minutes to soak, for coarse residues leave a little longer). Remove the dissolved residues by wiping with a wet cloth. If the residues can’t be completely removed with the help of a wet cloth, please use a wet melamine dirt eraser sponge with some washing–up liquid. For a streak-free finish, we recommend rubbing the wet surface until it is slightly foamy and then cleaning it with a sponge or clean soft cloth and clear water. Wipe the wet surface dry with a terry cloth/towel.

For tougher hard to remove stains, such as pen, inks, markers, permanent markers, lipstick, graffiti spray, we recommend the use of methylated spirits or acetone (= nail varnish remover), a paper towel and a melamine dirt eraser sponge.

For set-in or dried stains, place the paper towel soaked with some nail varnish remover/acetone or methylated spirits on the affected area (for about 1-2 minutes, for coarse residues leave a little longer).

Remove the loosened remains by wiping with a paper towel and then wipe with a melamine dirt eraser sponge to remove any residues.

For dried blood, moisten the affected area with a little laundry detergent powder and some water for 5 minutes (if necessary longer) and then remove the residue with a melamine dirt eraser sponge. Watermarks /chalky deposits are easily removed with some citric acid or vinegar (leave about 5 minutes, if necessary longer). Wipe the stain the melamine dirt eraser sponge to remove the stain.

Following these recommended cleaning instructions will ensure that you enjoy your Clean Touch surface for many years to come.


Light Grey

Hi Gloss

PT HG 2005

Light Grey

Fossil Grey

Hi Gloss

PT HG 2004

Fossil Grey

Ash Grey

Hi Gloss

PT HG 2007

Ash Grey

Lily White

Hi Gloss

PT HG 2001

Lily White

Beige

Hi Gloss

PT HG 2002

Beige

Scottish Cream

Hi Gloss

PT HG 2003

Scottish Cream

Lily White

Super Matte

PT SM 2008

Lily White

Beige

Super Matte

PT SM 2009

Beige

Scottish Cream

Super Matte

PT SM 2010

Scottish Cream

Fossil Grey

Super Matte

PT SM 2011

Fossil Grey

Nickel Grey Rockstone

Structures

PT RF 3014

Nickel Grey Rockstone

Graphite Grey Concrete

Structures

PT CF 3005

Graphite Grey Concrete

Smoky Grey Stone

Structures

PT MS 3001

Smoky Grey Stone

Sand Stone Concrete Beige

Structures

PT CF 3003

Sand Stone Concrete Beige

Pearl White Weave

Structures

PT WF 3006

Pearl White Weave

Chestnut Weave

Structures

PT WF 3007

Chestnut Weave

MET-101-Silver

Metals

MET 101 Silver

MET-101-Silver

MET-201-Bronze

Metals

MET 201 Bronze

MET-201-Bronze

MET-301-Copper

Metals

MET 301 Copper

MET-301-Copper

MET-401-Gold

Metals

MET 401 Gold

MET-401-Gold

PT SM 2012 Falcon Grey

Super Matte

PT SM 2012

PT SM 2012 Falcon Grey

PT SM 2013 Midnight Blue

Super Matte

PT SM 2013

PT SM 2013 Midnight Blue

Subscribe to our Newsletters